show_Riello_UPS_Master-MPS_range-removebg-preview
    Download Brochure
    Master MPS
    Power Range: 10 - 200 kVA

    FEATURES

    • Smart Online UPS
    • Output Power Factor 90%
    • Efficiency Control System (ECS)
    • Robust and Reliable
    • Galvanic Isolation
    • Parallelable up to 8 Units
    • High Overload Capacity
    • Extensive Parallel Configurations
    MODELSMPM 10BATMPM 15BATMPM 20BATMPM 30MPM 40MPM 60MPM 80MPM 100
    INPUT 
    Rated Voltage [V]380 / 400 / 415 three-phase + N
    Voltage tolerance [V]400 ±20% - 25% @ full load1
    Frequency [Hz]45-65
    Soft start0 - 100% in 120 sec. (selectable)
    Permitted frequency tolerance±2% (selectable from ±1% to ±5% from front panel)
    Standard equipment providedBack Feed protection; separable bypass line
    BYPASS 
    Rated Voltage [V]220 / 230 / 240 single-phase + N
    Rated frequency [Hz]50 or 60 (selectable)
    OUTPUT 
    Nominal power [kVA]10152030406080100
    Active power [kW]913,5182736547290
    Number of phases1
    Rated voltage [V]220 / 230 / 240 single-phase + N (selectable)
    Static stability±1%
    Dynamic stability±5% in 10 msec.
    Voltage distortion<1% with linear load / ≤3% with non-linear load
    Crest factor [lpeack/irms]3:1
    Frequency stability on battery0,05%
    Frequency [Hz]50 or 60 (selectable)
    Overload110% for 60 min; 125% for 10 min; 150% for 1 min.
    BATTERIES 
    TypeVRLA AGM / GEL; NiCd; SuperCaps; Li-ion; Flywheels
    Residual ripple voltage<1%
    Recharge voltage compensation-0,11% x V x °C
    Typical charge current0,2 x C10
    OVERALL SPECIFICATIONS 
    Weight without batteries [kg]200220230255302416616665
    Dimensions (WxDxH) [mm]555x740x1400800x740x1400800x800x1900
    Remote signalsdry contacts
    Remote controlsESD and bypass
    CommunicationsDouble RS232 + dry contacts + 2 slots for communications interface
    Ambient temperature for the UPS0 °C - +40 °C
    Recommended temperature for battery life+20 °C - +25 °C
    Range of relative humidity5-95% non-condensing
    ColourDark grey RAL 7016
    Noise level at 1 m (ECO Mode) [dBA]6062
    IP ratingIP20
    ECO Mode efficiencyup to 98%
    StandardsEuropean directives: LV 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant Classification in accordance with IEC 62040-3 (Voltage Frequency Independent) VFI - SS - 111
    Classification in accordance with IEC 62040-3(Voltage Frequency Independent) VFI - SS - 111
    Moving the UPSPallet jack

    1 For wider tolerance conditions apply.
    BATAlso available with internal batteries.

    MODELSMPT 10BATMPT 15BATMPT 20BATMPT 30MPT 40MPT 60MPT 80
    INPUT 
    Rated Voltage [V]380 / 400 / 415 three-phase + N
    Voltage tolerance [V]400 ±20% - 25% @ full load1
    Frequency [Hz]45-65
    Soft start0 - 100% in 120 sec. (selectable)
    Permitted frequency tolerance±2% (selectable from ±1% to ±5% from front panel)
    Standard equipment providedBack Feed protection; separable bypass line
    BYPASS 
    Rated Voltage [V]380 / 400 / 415 three-phase + N
    Rated frequency [Hz]50 or 60 (selectable)
    OUTPUT 
    Nominal power [kVA]10152030406080
    Active power [kW]913,51827365472
    Number of phases3 + N
    Rated voltage [V]380 / 400 / 415 three-phase + N (selectable)
    Static stability±1%
    Dynamic stability±5% in 10 msec.
    Voltage distortion<1% with linear load / ≤3% with non-linear load
    Crest factor [lpeack/irms]3:1
    Frequency stability on battery0,05%
    Frequency [Hz]50 or 60 (selectable)
    Overload110% for 60 min; 125% for 10 min; 150% for 1 min.
    BATTERIES 
    TypeVRLA AGM / GEL; NiCd; SuperCaps; Li-ion; Flywheels
    Residual ripple voltage<1%
    Recharge voltage compensation-0,11% x V x °C
    Typical charge current0,2 x C10
    OVERALL SPECIFICATIONS 
    Weight without batteries [kg]228241256315335460520
    Dimensions (WxDxH) [mm]555x740x1400800x740x1400
    Remote signalsdry contacts
    Remote controlsESD and bypass
    CommunicationsDouble RS232 + dry contacts + 2 slots for communications interface
    Ambient temperature for the UPS0 °C - +40 °C
    Recommended temperature for battery life+20 °C - +25 °C
    Range of relative humidity5-95% non-condensing
    ColourDark grey RAL 7016
    Noise level at 1 m (ECO Mode) [dBA]6062
    IP ratingIP20
    ECO Mode efficiencyup to 98%
    StandardsEuropean directives: LV 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant Classification in accordance with IEC 62040-3 (Voltage Frequency Independent) VFI - SS - 111
    Classification in accordance with IEC 62040-3(Voltage Frequency Independent) VFI - SS - 111
    Moving the UPSPallet jack

    1 For wider tolerance conditions apply.
    BATAlso available with internal batteries.

    MODELSMPT 100MPT 120MPT 160MPT 200
    INPUT 
    Rated Voltage [V]380 / 400 / 415 three-phase
    Voltage tolerance [V]400 ±20% - 25% @ full load1
    Frequency [Hz]45-65
    Soft start0 - 100% in 120 sec. (selectable)
    Permitted frequency tolerance±2% (selectable from ±1% to ±5% from front panel)
    Standard equipment providedBack Feed protection; separable bypass line
    BYPASS 
    Rated Voltage [V]380 / 400 / 415 three-phase + N
    Rated frequency [Hz]50 or 60 (selectable)
    OUTPUT 
    Nominal power [kVA]100120160200
    Active power [kW]90108144180
    Number of phases3 + N
    Rated voltage [V]380 / 400 / 415 three-phase + N (selectable)
    Static stability±1%
    Dynamic stability±5% in 10 msec.
    Voltage distortion<1% with linear load / ≤3% with non-linear load
    Crest factor [lpeack/irms]3:1
    Frequency stability on battery0,05%
    Frequency [Hz]50 or 60 (selectable)
    Overload110% for 60 min; 125% for 10 min; 150% for 1 min.
    BATTERIES 
    TypeVRLA AGM / GEL; NiCd; SuperCaps; Li-ion; Flywheels
    Residual ripple voltage<1%
    Recharge voltage compensation-0,11% x V x °C
    Typical charge current0,2 x C10
    OVERALL SPECIFICATIONS 
    Weight without batteries [kg]620640700800
    Dimensions (WxDxH) [mm]800x800x1900
    Remote signalsdry contacts
    Remote controlsESD and bypass
    CommunicationsDouble RS232 + dry contacts + 2 slots for communications interface
    Ambient temperature for the UPS0 °C - +40 °C
    Recommended temperature for battery life+20 °C - +25 °C
    Range of relative humidity5-95% non-condensing
    ColourDark grey RAL 7016
    Noise level at 1 m (ECO Mode) [dBA]6568
    IP ratingIP20
    ECO Mode efficiencyup to 98%
    StandardsEuropean directives: LV 2014/35/EU low voltage Directive EMC 2014/30/EU electromagnetic compatibility Directive Standards: Safety IEC EN 62040-1; EMC IEC EN 62040-2; RoHS compliant Classification in accordance with IEC 62040-3 (Voltage Frequency Independent) VFI - SS - 111
    Classification in accordance with IEC 62040-3(Voltage Frequency Independent) VFI - SS - 111
    Moving the UPSPallet jack

    1 For wider tolerance conditions apply.
    BATAlso available with internal batteries.

    Related Product

    UPS Riello Sentinel Pro
    Power Range: 700 - 3000 VA

    Sentinel Pro

    1:1
    Power Range: 4 - 10 kVA

    Sentinel Dual SDU

    1:1 1-3:1

    UPS Riello Online Rackmount
    Power Range: 5 -10 kVA

    Sentinel Tower

    1-3:1 1:1

    UPS Riello Sentinel Tower
    UPS Riello Sentryum
    Power Range: 10 -120 kVA

    Sentryum

    3:3 1-3:1
    Power Range: 100 - 600 kVA

    Master HP

    3:3
    Power Range: 10 - 200 kVA

    Master MPS

    3:3 3:1